Custom Work

WHAT'S NEW

MARKERS

ACCESSORIES
    1. COCKERS
    2. ANGELS
    3. ALL MARKERS

BARRELS

AIR & FITTINGS

CUSTOM WORK

STORE INFO

SERVICE

FAQ's

CLEARANCE

SPONSORED TEAMS

CONTESTS & EVENTS

LINKS

ANODIZING:
P&P can do ANY color or color combination of anodizing that you can think of. Choosing your colors is usually the hardest part. The simplest is one color. Other options include acid wash (seen on our Fire & Ice cold fusions), fade - where one color fades into another, and splash - where color(s) appear to be randomly applied in thin splash like lines on top of other color(s) (both fade and splash is illustrated by our Blue Ice Cold Fusion). Turn around time is 2-3 weeks for 1 single color, 4-6 weeks for more than one color. Keep in mind that each time a color appears on the marker, it is counted as an additional color - for example if you wanted a black to red to black fade that would be 3 colors - not 2. This is can be tricky - especially when dealing with splashes that fade - so feel free to contact us for advice or clarification of colors.

The following prices include stripping your current color, polishing, and anodizing your new color/s for 6-8 pieces (depending on size). It does not include disassembly or reassembly of the marker. We can, however, disassemble and reassemble your marker for an additional $100. Most people want high gloss colors, but matte finish is also available at no additional charge. Barrels must be raw - and have never been anodized before - we carry most manufacturers barrels this way or call the manufacturer directly and tell them you want to purchase a raw barrel.

Now, the prices:

Number of Colors Type of Anodizing Price
1 Single Color $125
2 - 1 base & 1 splash Splash $175
2 - 2 base Fade $225
2 - 2 base Acid Wash $225
3 - 1 base & 2 splash Splash $225
3 - 3 base Fade $250
3 - 2 base & 1 splash Acid Wash $250
5 - 2 base & 3 splash Acid Wash or Fade $400
6 - 3 base & 3 splash Acid Wash or Fade $450

The above pricelist is a guide for the most requested anodizing, there are other options available if you don't see what you're looking for. As far as graphic anodizing goes, it usually runs about $900 and takes 8-12 weeks to complete.


MILLING:
Milling is what is done to the gun to create a pattern or design in the actual metal of the body of the gun. Most bodies can be milled, however the cost may be prohibitive for all but the tournament level guns. You can choose from set milling patterns or customize your own. The process usually takes from 2-4 weeks, depending on the intricacies of the pattern. Remember that milling will expose the raw aluminum beneath the current color of your gun, so you may want to plan on having it re-anodized at the same time. If this sounds like too much, there is another option-a body kit. Body kits are pre-milled and anodized replacement bodies specifically designed for each gun. Ask us if you are interested in this option.

Supercocker Design $200.00
Cold Fusion Design $225.00
Limited Edition Design $350.00


COCKER WORK:

TRIGGER WORK
Basic-smoothes the trigger $45.00
Premium-shortens and smoothes the pull $85.00
Limited Edition-shortest fastest pull possible $125.00

COCKER TUNE-UP $45.00
COCKER RE-TIME $45.00